Overview:
LT-S8028G-2GT2GX24GT is the enhanced switch with 24*10/100/1000M RJ45 downlink ports and 2*1G SFP + 2*10/100/1000M RJ45 uplink ports, which provides a high-performance switch architecture that is capable of providing the non-blocking switch capacity and wire-speed throughput as high as 56Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. it supports to make the package of V ports(1-2 ports) transmission on priority when network blocking, which make the important data zero package loss. It can be linked to a metro switch, backbone or high-capacity server. Besides, the Flow Control function of the LT-S8028G-2GT2GX24GT enables routers and servers to directly connect to the Switch for fast and reliable data transfer. It supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. LT-S8028G-2GT2GX24GT supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. The high data throughput and 48Gbps internal switching capacity make it ideal for most Gigabit environments, especially when network is upgraded to a Gigabit environment.
Features:
• 24*10/100/1000M RJ45 ports access with 2* 1G SFP + 2*10/100/1000M RJ45 uplink ports
• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
• Make the package of V ports(1-2 ports) transmission on priority when network blocking, which make the important data zero package loss.
Supports VLAN and port isolation
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Integrated address look-up engine, supporting 8K absolute MAC addresses
• Supports 10Kbytes jumbo frame packet
• Supports 2Mbits large buffer
• IEEE 802.1Q VLAN packet transparency support
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 4KV surge protection for Ethernet ports and power port
|
Model
|
LT-S8028G-2GT2GX24GT
|
|
|
Ports
|
Fixed ports
|
2*1G SFP slots + 2*10/100/1000M
RJ45 uplink ports, +24*10/100/1000M
RJ45 downlink ports
|
|
|
Port type
|
RJ45
port, full duplex, MDI/MDI-X adaptive
|
|
|
Operation mode
|
Store and forward
|
|
|
Layer 2 switching
|
MAC address
table
|
8K
|
|
|
Switching
capacity
|
56G
|
|
|
Packet
forwarding rate
|
41.664Mpps
|
|
|
Buffer
|
2Mbits
|
|
|
Polarity
reversal
|
Support
|
|
|
Flow
control
|
Support
|
|
|
Jumbo
frame
|
10Kbytes
|
|
|
Port
Mirroring
|
Support
|
|
|
Network
storm suppression
|
Support
|
|
|
Network topology
|
Star
topology
|
Support
|
|
|
Bus
topology
|
Support
|
|
|
Tree
topology
|
Support
|
|
|
Dip switch
|
1：V port（1~2）Make the package of V ports(1-2) transmission on priority
when network blocking
|
|
2：Port isolation
|
|
3：VLAN
|
|
4：Port
mirroring
|
|
Protection
|
Power surge
protection
|
IEC
61000-4-5 Level 4（4KV）（8/20us）
|
|
|
Ethernet
ports surge protection
|
IEC
61000-4-5 Level 4（4KV）（10/700us）
|
|
|
General
|
Weight
|
Net weight
2.2kg
|
|
|
Dimension(L*W*H)
|
300*235*44mm
|
|
|
Operation
temperature
|
0℃~+50℃
|
|
|
Storage
temperature
|
-40℃~+70℃
|
|
|
Operation
humidity
|
10%~90%RH（non-condensing）
|
|
|
Storage
humidity
|
5%~95%RH（non-condensing）
|
|
|
Heat
dissipation
|
Fan-less,
natural cooling
|
|
|
Input voltage
|
AC 100-240V
50/60HZ
|
|
|
Total
consumption
|
＜15W
|
|
|
Model
|
Description
|
|
LT-S8028G-2GT2GX24GT
|
Unmanaged Ethernet switch with 2*1G SFP slots and 2*10/100/1000M RJ45 uplink ports + 24*10/100/1000M RJ45
downlink ports，AC 100-240V 50/60HZ, enhanced
function with Dip switch
|
